To Next Page

To Previous Page

CHAPTER 4 TRANSMISSION SEQUENCE

B-EP Series

4-8

(3) When interrupting communication with the 2nd label command separator, and then

transmitting subsequent data,

1st transmission:

{AY;+00,1,3|}

{D0130,0480,0100|}

{C|}

{LC;0010,0010,0470,0060,1,2|} 1st label data

{PC00;0030,0050,2,1,a,00,B,+0000000000|}

{RC00;2inch 0001|}

{XS;I,0001,0000C2011|}

{AY;+00,1,3|}

{D0130,0480,0100|}

{C|}

{LC;0010,0010,0470,0060,1,2|}

{PC00;0030,0050,2,1,a,00,B,+0000000000|} 2nd label data

2nd transmission:

{RC00;2inch 0002|}

{XS;I,0001,0000C2011|}

Print result: c as shown below is printed after the 1st transmission, and d as shown below

is printed after the 2nd transmission.



Interrupts communication with the

command separator.



2 inch 0001

2 inch 0002

Transmits subsequent

data.

Toshiba B-EP4DL-GH32-QM-R Interface Specification

Other manuals for Toshiba B-EP4DL-GH32-QM-R