Toshiba B-EP4DL-GH32-QM-R - Page 160

CHAPTER 4 TRANSMISSION SEQUENCE
B-EP Series
4-50
(4) When interrupting communication while the Page Mode Command is running, issuing the
Cancel Command during retransmission and then retransmitting data from the beginning,
1st transmission:
[GS]C
DATA001[LF]
DATA002[LF]
DATA003[LF] 1st label data (underway)
DATA004[LF]
DATA005[LF]



2nd transmission:
[CAN]
[GS]C
DATA001[LF]
DATA002[LF]
DATA003[LF] 1st label data (retransmission)
DATA004[LF]
DATA005[LF]
DATA006[LF]
[FF]
Print result: Data is properly printed (as shown below).
Issues the Cancel Command and
transmits data from the beginning.

Interrupts communication while
the command is running.
DATA001[LF]
DATA002[LF]
DATA003[LF]
DATA004[LF]
DATA005[LF]
DATA006[LF]