To Next Page

To Previous Page

Page

9. ERROR PROCESSING ................................................................................................................................9-1

9.1 GENERAL DESCRIPTION ......................................................................................................................9-1

9.2 COMMUNICATION ERRORS .................................................................................................................9-2

9.2.1 COMMAND SYNTAX ERROR ........................................................................................................9-2

9.2.2 HARDWARE ERROR .....................................................................................................................9-2

9.2.3 LAN DRIVER ERROR .....................................................................................................................9-2

9.3 ERRORS IN ISSUING OR FEEDING ......................................................................................................9-3

9.3.1 PAPER JAM / LABEL END / NORMAL END + LABEL END...........................................................9-3

9.3.2 BROKEN HEAD DOTS ERROR .....................................................................................................9-5

9.3.3 THERMAL HEAD EXCESSIVE TEMPERATURE ...........................................................................9-5

9.3.4 COVER OPEN ERROR ..................................................................................................................9-5

9.4 BATTERY ERROR ..................................................................................................................................9-6

9.4.1 LOW BATTERY ..............................................................................................................................9-6

9.4.2 ABNORMAL HIGH VOLTAGE ........................................................................................................9-6

9.4.3 ABNORMAL BATTERY TEMPERATURE ......................................................................................9-6

9.5 CHARGING ERROR ...............................................................................................................................9-6

9.6 BLUETOOTH SETTING ERROR ............................................................................................................9-6

9.7 ERRORS IN WRITABLE CHARACTER AND PC COMMAND SAVE MODES .......................................9-6

9.7.1 WRITE ERROR ..............................................................................................................................9-6

9.7.2 FORMAT ERROR ...........................................................................................................................9-6

9.7.3 MEMORY FULL ..............................................................................................................................9-6

9.8 SYSTEM ERRORS .................................................................................................................................9-7

9.8.1 ADDRESS ERROR .........................................................................................................................9-7

9.8.2 GENERAL INVALID COMMAND EXCEPTION ..............................................................................9-7

9.8.3 SLOT INVALID EXCEPTION ..........................................................................................................9-7

9.8.4 PCB IDENTIFICATION ERROR .....................................................................................................9-7

9.8.5 THERMAL HEAD IDENTIFICATION ERROR .................................................................................9-7

9.9 OPERATIONS WHEN AN ERROR OCCURS .........................................................................................9-8

9.10 OPERATIONS AFTER AN ERROR IS CLEARED ..................................................................................9-8

9.10.1 LABEL MODE .................................................................................................................................9-8

9.10.2 RECEIPT MODE .............................................................................................................................9-8

9.10.3 RECEIPT1 MODE OR ESC/POS MODE ........................................................................................9-8

9.10.4 TPCL MODE ...................................................................................................................................9-8

9.11 STATUS VALUES ...................................................................................................................................9-9

10. SYSTEM MODE.......................................................................................................................................... 10-1

10.1 GENERAL DESCRIPTION .................................................................................................................... 10-1