CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP Series
5-35
00 to 99 (in units of dots)
ii: Rotational angles of a character and character string
00: 0° (char.) 0° (char.-string)
11: 90° (char.) 90° (char.-string)
22: 180° (char.) 180° (char.-string)
33: 270° (char.) 270° (char.-string)
01: 0° (char.) 90° (char.-string)
12: 90° (char.) 180° (char.-string)
23: 180° (char.) 270° (char.-string)
30: 270° (char.) 0° (char.-string)
j: Character attribution
B: Black character
W (aabb): Reverse character
aa: No. of dots from the character string to the end of the black
background in the horizontal direction
bb: No. of dots from the character string to the end of the black
background in the vertical direction
aa: 01 to 99 (in units of dots)
bb: 01 to 99 (in units of dots)
F (aabb): Boxed character
aa: No. of dots from the character string to the box in the horizontal
direction
bb: No. of dots from the character string to the box in the vertical
direction
aa: 01 to 99 (in units of dots)
bb: 01 to 99 (in units of dots)
* Reserved in the case of the compatible mode for the B-SP series
(If specified, it is processed as “B.”)
C (aa): Strike-through character
aa: No. of dots from the character string to the end of a strike-through in
the horizontal direction
aa: 01 to 99 (in units of dots)
* Reserved in the case of the compatible mode for the B-SP series
(If specified, it is processed as “B.”)
* Descriptions in parentheses are omissible.
(If omitted, it is character magnification (horizontal or vertical magnifications,
whichever is larger) × 6 dots.)
Jkkll: Bold character designation
(Omissible. If omitted, this process is not performed.)
kk: No. of horizontal shift dots
00 to 16 (in units of dots)
ll: No. of vertical shift dots
00 to 16 (in units of dots)
* Reserved in the case of the compatible mode for the B-SP series
Font types: U, V, r and w only
To Next Page
Loading...
