Toshiba B-EP4DL-GH32-QM-R - Page 207

CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP Series
5-37
Explanation
(1) Character string number
When drawing by the Data Command ([ESC] RC), the format designated by the character
string number is selected.
(2) Print origin of coordinates
[Printing direction: Bottom first] [Printing direction: Top first]
The print origin of coordinates must be set so that the character drawing result will be
within the effective print area set by the Label Size Set Command ([ESC] D).
(3) Horizontal magnification and vertical magnification
Vertical
magnification
Vertical
magnification
Horizontal
magnification
Horizontal
magnification
Label
Paper feed direction
0
X
Y
Paper feed direction
0
X
Y
Backing paper
Effective
print length
Effective print
width
Effective print
width
Origin of
coordinates
(
0, 0
)
Origin of
coordinates
(0, 0)
Print origin
of coordinates
Print origin
of coordinates
Effective
print length
Sample
Label
Backing paper