CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP Series
5-69
e: Type of check digit
1: Without attaching check digit
2: Check digit check
WPC Modulus 10
CODE93 Modulus 47
CODE128 PSEUDO 103
3: Check digit auto attachment (1)
WPC Modulus 10
CODE93 Modulus 47
CODE128 PSEUDO 103
UCC/EAN128 or EAN128 PSEUDO 103
Customer barcode Special check digit
POSTNET Special check digit
RM4SCC Special check digit
4: Check digit auto attachment (2)
WPC Modulus 10 + Price C/D 4 digits
5: Check digit auto attachment (3)
WPC Modulus 10 + Price C/D 5 digits
Note: For the Customer barcode, POSTNET and RM4SCC, only “3: Check
digit auto attachment (1)” is effective.
ff: 1-module width
01 to 15 (in units of dots)
k: Rotational angle of barcode
0: 0°
1: 90°
2: 180°
3: 270°
llll: Height of the barcode
0000 to 1000 (in 0.1 mm units)
For the Customer barcode, POSTNE and RM4SCC along with KIX CODE,
the height of the long bar is specified.
mnnnnnnnnnn: Increment and decrement
(Omissible. If omitted, increment/decrement is not performed.)
m: Designates whether to increment or decrement.
+: Increment
-: Decrement
nnnnnnnnn: Skip value
0000000000 to 9999999999
ooo: Length of WPC guard bar
(Omissible. If omitted, the guard bar is not extended.)
000 to 100 (in 0.1 mm units)
p: Selection of print or non-print of numerals under bars
(Omissible. If omitted, the numerals under the bars are not printed.)
0: Non-print
1: Print
To Next Page
Loading...
Need help?
General