EasyManuals Logo

Toshiba B-EP4DL-GH32-QM-R Interface Specification

Toshiba B-EP4DL-GH32-QM-R
788 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
CHAPTER 3 INTERFACE
B-EP Series
3-14
ID set command (erroneous transmission)
*1: Explanation of a command packet (when the length is designated in 1 byte.)
To send [ESC] ID; [03H] [51H] [LF] [NUL].
[02H]
[00H][00H] [08H] [1BH]ID;[03H][51H][0AH][00H] [F7H][8AH]
CRC
Command
Length
Printer ID
STX
Printer
A link request is detected.
A link is established.
Within 40 msec.
Host
PAD
NAK
Normal reception (CRC OK)
ACK for the command process end is
transmitted.
Command packet (*1)
Start of data process
End of data storage
A
CK
EOT
A
CK
A link request is transmitted
every 50 msec. if the printer
sends no NAK.
Within 1 sec.
Within 1 sec.
Within 200 msec.
Within 40 msec.
NAK
Resend command packet (*1)
Within 1 sec.
Erroneous data reception of CRC (CRC
NG) In case of a CRC error caused by
receiving erroneous data due to noise of
ambient light, etc.

Table of Contents

Other manuals for Toshiba B-EP4DL-GH32-QM-R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba B-EP4DL-GH32-QM-R and is the answer not in the manual?

Toshiba B-EP4DL-GH32-QM-R Specifications

General IconGeneral
BrandToshiba
ModelB-EP4DL-GH32-QM-R
CategoryPrinter
LanguageEnglish

Related product manuals