CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
B-EP Series
6-83
• When the compatible mode for the B-SP series is on.
LABEL mode (Mode = 0)
[IrDA: TEC Protocol]
STX
Mode information (16 bytes)
CRC CRC
L A B E L SP SP SP SP SP SP SP SP SP SP SP
02H 4CH 41H 42H 45H 4CH 20H 20H 20H 20H 20H 20H 20H 20H 20H 20H 20H xxH xxH
[IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C, Bluetooth, Wireless LAN]
STX
Mode information (16 bytes)
L A B E L SP SP SP SP SP SP SP SP SP SP SP
02H 4CH 41H 42H 45H 4CH 20H 20H 20H 20H 20H 20H 20H 20H 20H 20H 20H
The above shows examples where the message is received in LABEL mode when the
compatible mode for the B-SP series is off. In addition, the following messages are
returned.
TPCL mode TPCL-LE
TPCL1 mode TPCL-LE1
LABEL mode LABEL
RECEIPT mode RECEIPT
RECEIPT1 mode RECEIPT1
ESC/POS mode ESC/POS
Online reset menu USERSYSTEM
SYSTEM mode for users
PAUSE + POWER keys
USERSYSTEM
SYSTEM mode for
administrators
FEED + POWER keys
When the password setting is on
and before it is entered
USERSYSTEM
When the password setting is on
and after it is entered
SYSTEM
When the password setting is off SYSTEM
* indicates a space.
To Next Page
Loading...
Need help?
General