CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
B-EP Series
8-94
ESC/POS mode (Mode = 4)
[IrDA: TEC Protocol]
STX Mode information (16 bytes) CRC CRC
E S C / P O S SP SP SP SP SP SP SP SP SP
02H 45H 53H 43H 2FH 50H 4FH 53H 20H 20H 20H 20H 20H 20H 20H 20H 20H xxH xxH
[IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C, Bluetooth, or wireless LAN]
STX Mode information (16 bytes)
E S C / P O S SP SP SP SP SP SP SP SP SP
02H 45H 53H 43H 2FH 50H 4FH 53H 20H 20H 20H 20H 20H 20H 20H 20H 20H
The above is an example where the message is received in the ESC/POS mode (Mode = 4). In
addition, the following messages are returned.
• When the compatible mode for the B-SP series is off
TPCL mode TPCL
TPCL1 mode TPCL1
LABEL mode LABEL
RECEIPT mode RECEIPT
RECEIPT1 mode RECEIPT1
ESC/POS mode ESC/POS
Online reset menu USERSYSTEM
SYSTEM mode for users
PAUSE + POWER keys
USERSYSTEM
SYSTEM mode for administrators
FEED + POWER keys
When the password setting is on
and before it is entered
USERSYSTEM
When the password setting is on
and after it is entered
SYSTEM
When the password setting is off SYSTEM
TPCL (strip issue mode) TPCL(S)
TPCL1 (strip issue mode) TPCL1 (S)
LABEL (strip issue mode) LABEL (S)
* indicates a space.
To Next Page
Loading...
Need help?
General