CHAPTER 9 ERROR PROCESSING
B-EP Series
9-10
State
LED
indication
Status by the
Status Request
Command
Auto status
transmission
Status when the
command is
received during an
error state
Condition of
clearing error
IrDA: TEC Protocol
IrDA: IrCOMM
RS-232C
Bluetooth
Wireless LAN
IrDA: IrCOMM
RS-232C
Bluetooth
Wireless LAN
IrDA: TEC Protocol
IrDA: IrCOMM
RS-232C
Bluetooth
Wireless LAN
RS-232C
IrDA
Bluetooth
Wireless LAN
37H 37H 37H Charging error Blink in red
33H, 37H, 31H 33H, 37H, 32H 33H, 37H, 32H
Turn the power
off.
39H 39H 39H Bluetooth initialization
error
Blink in red
33H, 39H, 31H 33H, 39H, 32H 33H, 39H, 32H
Turn the power
off.
39H 39H 39H Bluetooth setup error Blink in red
33H, 39H, 31H 33H, 39H, 32H 33H, 39H, 32H
Turn the power
off.
45H Wait for battery
recovery
ON in green
34H, 35H, 31H
46H Wait for head
temperature reduction
ON in green
34H, 36H, 31H
47H Wait for motor
temperature reduction
ON in green
34H, 37H, 31H
14H Pause state OFF
30H, 34H, 31H
Press the
[PAUSE] key.
55H Bit map writable
character/PC
command mode
ON in green
35H, 35H, 31H
Sleep ON in green — — — —
02H 02H 02H Ir packet error Blink in red
30H, 36H, 31H 30H, 36H, 32H 30H, 36H, 32H
Reset by the
[PAUSE] key
To Next Page
Loading...
Need help?
General