CHAPTER 11 OTHER FUNCTIONS
B-EP Series
11-6
• Strip wait status
If the Status Request Command is sent while printing is being attempted using the [FEED] key
and a label is on the strip shaft (for example, while idling, after feeding a label, or after printing
all specified number of labels), the printer returns the strip wait status to the host. If the Status
Request Command is sent while a label is being printed or issued, the strip wait status is
returned.
• Status in ESC/POS mode
Similarly, a response is returned to the Status Request command commonly used by the B-EP
series in ESC/POS mode.
However, any status transmission will not be performed after the completion of printing as
described in (1) above and when an error occurs.
To Next Page
Loading...
Need help?
General