CHAPTER 3 INTERFACE
B-EP Series
3-46
• Status in the compatible mode for the B-SP series
00H: Normal state (idling)
01H: Cover open state
02H: Command syntax error (including Ir packet error)
03H: Paper jam
04H: Label end
05H: Cover open error
06H: Broken head dots error
07H: Thermal head excessive temperature (including ambient temperature error,
abnormal battery temperature, and battery excessive temperature)
08H: Flash ROM write error
09H: Flash ROM erase error
0AH: Low battery (Print failure)
0BH: Operating (including wait for strip, pause state, writable character/PC command
save mode, wait for battery recovery, wait for head temperature reduction, and wait
for motor temperature reduction)
0CH: Communication error * In the RECEIPT mode or for RS-232C connection only
0DH: Normal end + Label end
0EH: Flash ROM storage area full state
10H: Normal issue end
37H: Charging error
38H: Bluetooth setting successfully completed
39H: Bluetooth setup error (including initialization error)
To Next Page
Loading...
Need help?
General