USTER®
HVI 900
Instruction Manual
Uster Technologies, Inc.
Chapter 6
Version 4.0 (1.99) HVI 900 System Testing - Page 6-18
After the measurements are completed, the results are displayed to the
right of Length, Uniformity, Strength, and Elongation. Each of the field
labels is highlighted to indicate that the test is finished. The
microprocessor averages the results of the repetitions and displays them
on the screen.
The Color/Trash and Micronaire tests can be performed in a different
sequence than described here. However, keep in mind that a
micronaire value is required to calculate Length/Strength and Fineness
test results and that an identification number (ID) must be entered before
the test results are printed or transmitted.
To Next Page
Loading...
