USTER®
HVI 900
Instruction Manual
Uster Technologies, Inc.
Chapter 1
Version 4.0 (1.99) Introduction - Page 1-6
5.7 Software Version 4.0 Features
The HVI 900 system’s version 4.0 software uses a pop-up menu
structure. This allows you to select the procedures to be performed from
options displayed on the screen. Once a selection has been entered,
the screen reflects the choice and displays the next menu or procedure
level. In this way, the screen provides the step-by-step information
needed to proceed.
5.7.1 Menus
Menu items are selected using the arrow keys to move the cursor to
highlight the name of the item or procedure to be performed. Then the
ENTER key is pressed to "select" the item. Some menu items may have
a word in the right column. This word indicates the current selection for
the item. Refer to the section entitled "Changing Selections/Parameters"
in this chapter for additional details on using menus.
5.8 Error Messages
Error messages are usually preceded by an audible tone that signals an
instrument or test malfunction. Audio tones also sound if test parameters
have been exceeded. A message statement displays on the monitor to
indicate the nature of the problem. Refer to the Appendix for a list of
possible error messages and the actions required to correct them.
To Next Page
Loading...
