USTER HVI 900 - Chapter 12 HVI 900 System Maintenance; Cleaning the System; As Required; After each Shift

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 12
Version 4.0 (1.99) System Maintenance - Page 12-1
Chapter 12 HVI 900 System
Maintenance
The HVI 900 System has been designed to reduce maintenance to a
minimum. However, to keep the instruments in top condition, a few tasks
must be performed routinely.
3 Cleaning the System
Maintenance can be divided into four categories:
 As required
 After each shift
 Daily
 Weekly
3.4 As Required
Excess cotton should be removed from the Fibrosampler 192-1 carding
plate as required. Refer to the chapter titled “Fibrosampler 192" for
details on cleaning and maintaining the Fibrosampler.
3.5 After Each Shift
After each shift, the excess fiber that has gathered in the instrument
during the measurement procedures should be removed using a vacuum
cleaner.
• Swing the monitor arm away from the Length/Strength cabinet so