USTER®
HVI 900
Instruction Manual
Uster Technologies, Inc.
Chapter 8
Version 4.0 (1.99) 940 DataManager - Page 8-6
4 Reports
4.4 Overview
This section is used to design and generate reports to be displayed on
the screen or printed on the system printer. These reports contain a
variety of information according to your specifications for identifiers,
properties, and report types.
Reports generated on the screen are limited to 78 characters; reports
that are sent to the printer are limited to 131 characters. It is suggested
that you select the report destination prior to selecting the properties to
be included in the report because of the impact on the amount of
characters that can be displayed or printed. If you select more
properties than can be legitimately used for your destination and report
type specifications, the 940 DataManager will display a warning
message.
To Next Page
Loading...
