USTER HVI 900 - Recommended Lot Limits for Cotton

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 14
Version 4.0 (1.99) Appendix - Page 14-10
8 Recommended Lot Limits for
Cotton
Uster Technologies recommends that the following values be used for
cotton lot limits. Of course, users may set their own values for lot limits
by selecting the
Status item from the MAIN MENU, then selecting Lot
Limits from the STATUS MENU.
MIC LOWER LIMIT 3.2
MIC UPPER LIMIT 5.9
Inches Millimeters
LENGTH LOWER LIMIT 0.93 22.9
LENGTH UPPER LIMIT 1.35 34.3
Ratio Index
UNIFORMITY LOWER LIMIT 39 77
UNIFORMITY UPPER LIMIT 50 90
Stelometer Pressley (HVI)
STRENGTH LOWER LIMIT 18 24
STRENGTH UPPER LIMIT 34 45
Upper and lower limits for other properties should be set to 0 (zero).
If test results are to be transmitted to an external computer, the above
limits should also be set in the DataManager 940's L
OT LIMITS MENU
(refer to the DataManager 940 Instruction Manual or the 940
DataManager chapter in this manual.