USTER®
HVI 900
Instruction Manual
Uster Technologies, Inc.
Chapter 12
Version 4.0 (1.99) System Maintenance - Page 12-2
that the top of the cabinet can be lifted.
• Lift the top of the Length/Strength cabinet, and vacuum all areas
under the cover. Pay particular attention to cleaning the comb track
area.
• After cleaning, close all doors and covers to their original positions.
3.6 Daily
The Lint Waste Box on Version 3 instruments should be cleaned daily.
• The vacuum on the box is relieved using the vacuum ON/OFF switch
on the front panel, by opening the instrument doors, or by raising the
top. Use the handles to open the lint/waste box doors and remove
all fibers from the lint box by hand. Clean the filter inside the waste
box with a brush (or vacuum cleaner) removing all loose material.
Upon completion, close the door. Both doors must be closed for
proper operation.
• Using a clean, dry cloth; wipe off the two rails on which the comb
assembly moves left and right.
• Clean the Color Window.
• Inspect the computer's Cooling Fan Filters, and clean if necessary.
3.7 Weekly
Check the Inlet/Filter air filters at least once a week to see if water has
collected in the filter. If so, remove the water by pushing the release
valve on the bottom of the glass bulb.