USTER HVI 900 - 940 Datamanager; Synthetic Testing

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 3
Version 4.0 (1.99) System Startup - Page 3-6
4.8 940 DataManager
Test results from the HVI system are collected, sorted, and stored. They
can be reviewed, interpreted, and prepare the files for use with Uster
Technologies’ BIAS using the 940 DataManager. It is selected by
highlighting the 940
DATAMANAGER MENU item and pressing ENTER
key. The following selections can be made from this menu.
♦ Reports
♦ Histograms
♦ Data Export
♦ Categories
♦ Edit Database
Refer to Chapter 8, 940 DataManager, for instructions on using the
940 DATAMANAGER MENU.
4.9 Synthetic Testing
The HVI 900 system can be used for testing synthetic fibers. It is
selected by highlighting SYNTHETIC FIBER MENU item and pressing the
ENTER key. The following items can be selected from this menu.
♦ Synthetic Fiber Testing
♦ Synthetic Fiber Calibration
♦ Length Standard Calibration
♦ Length/Strength Setup
♦ Status
♦ Diagnostics
Refer to Chapter 10, Synthetic Fiber Testing, for instructions on testing
synthetic fibers.