USTER HVI 900 - Trashmeter; Color Tray; Transmission Timeout; Date

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 4
Version 4.0 (1.99) Status - Page 4-5
4.6 Trashmeter
The Trashmeter option can be turned Off or On to indicate whether a
trash analysis should or should not be performed during System Testing.
♦ Off — No trash analysis is performed during System Testing.
♦ On — The Trashmeter performs a trash analysis during System
Testing.
4.7 Color Tray
The Color Tray option is applicable to the HVI 900 Automatic only. It
appears shaded (grayed out) on the HVI 900, Version 4 software.
4.8 Transmission Timeout
The Transmission Timeout option is used to control the amount of time in
seconds that the instrument should wait for an acknowledgment from the
external computer. Any number between 1 and 100 is valid.
4.9 Date
The Date menu item is used to control the system date. It defaults to the
current date but can be changed by highlighting the selection and
pressing the ENTER key. An entry box is displayed where the date
should be entered in Month/Day/Year (MM/DD/YY) format.