USTER HVI 900 - Explanation of the Synthetic Fiber Testing Screen

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 10
Version 4.0 (1.99) Synthetic Fiber Testing - Page 10-28
5.4.11 Reject Sample to
Computer/DataManager
This selection is available when the External Computer and/or
DataManager is On.
When the test results for the last sample tested should be rejected, a
signal is sent to the computer/DataManager that the previous sample
tested is to be rejected. The test results for the rejected sample will not
be included in any mathematical analyses performed on the samples
listed for that identifier.
5.4.12 Sign-off External Computer
This selection is available when External Computer is ON if one or more
items on the TRANSMISSION TYPE MENU is set to ON. If External Computer
is ON, but all items on the TRANSMISSION TYPE MENU are set to OFF, this
selection is not displayed.
5.5 Explanation of the Synthetic
Fiber Testing Screen
Access the Synthetic Fiber Testing Screen by selecting the
Continue with
Testing
item from the SYNTHETIC FIBER SAMPLE TESTING MENU AND then
ENTER.