USTER®
HVI 900
Instruction Manual
Uster Technologies, Inc.
Chapter 10
Version 4.0 (1.99) Synthetic Fiber Testing - Page 10-17
4.4.3 Fiber Name
This selection allows you to enter the name for a new fiber. The name
you type will overwrite the current name for the fiber number. You can
enter type up to sixteen (16) characters for the fiber name. Fiber names
that contain all blanks will be excluded from the Status Listings.
4.5 Fiber Dependent Instrument
Constants
Each of the items defined on this menu will be associated with the fiber
that is named in the header of the window. The items on this menu
should be defined for each fiber selection. Type the values, which are
appropriate for the selected fiber.
4.5.1 SL1% & SL2%
SL1% and SL2% are the percentages used to calculate Len1 and Len2 as
reported in calibration and testing. Uniformity is 100 times the ratio of
Len1 and Len2.
To Next Page
Loading...
