USTER®
HVI 900
Instruction Manual
Uster Technologies, Inc.
Chapter 7
Version 4.0 (1.99) Module Testing - Page 7-29
5.6 Color/Trash Module Testing
Procedures
• If an ID is required (because the data will be printed or transmitted),
enter up to 12 alphanumeric characters for the bale identification
number via the keyboard or scanner. Be sure the number is entered
correctly, and then press ENTER.
• The highlighted instruction line will display "Test 1 of XX," with XX
being the total number of tests that are to be performed for each
sample.
• Place the sample on the sample window.
• Press the start button(s).
• When the test is completed, the results are displayed on the Color
and Trash Module Testing Screen. Perform the remaining tests, until
the required number of tests has been performed.
To Next Page
Loading...
