USTER HVI 900 - ICC Sl2

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 5
Version 4.0 (1.99) Calibration - Page 5-15
4.10 ICC SL2%
The cotton industry has chosen 2.5 % for the ICC mode. When this item
is selected, an instruction line is displayed on the screen where a value
for ICC SL2 % should be entered. You many enter a value other than
2.5 percent, if appropriate.
When the Calibration Mode is set to HVI, no information is displayed in
this field. A warning message is displayed indicating that Calibration
Mode must be changed to ICC to set ICC SL2%.
• Change the values, if needed, by using the arrow keys to highlight
the item, then by pressing the ENTER key. Enter the value at the
prompt, and then press ESCAPE to save the data.