USTER®
HVI 900
Instruction Manual
Uster Technologies, Inc.
Chapter 4
Version 4.0 (1.99) Status - Page 4-25
Expired or invalid Lot Limits can be removed from the Lot Limits list using
the Delete Existing Lot Limits item. When this item is selected, a
confirmation box is displayed requiring you to confirm that the selected
specification is to be deleted.
• Press "Y" to delete the item. After the specification is deleted, the
STATUS MENU will display, and "None" appears as the current
selection.
• Press "N" to exit the without deleting the item. The STATUS MENU
will display, and the same lot limit is displayed as the current
selection.
4.17 Retest Tolerances
If the Length/Strength, Color, or Trash test results indicate that the
measurements from the two sides of the bale are not within the Retest
Tolerance limits, an error message is displayed beside the measured
value out of tolerance. When this occurs, the test for that property must
be performed again. If, after the sample is retested, the values are still
outside the retest tolerance limits, this is an indication that the sample
came from a “two-sided” bale.
To Next Page
Loading...
