USTER HVI 900 - Number of Micronaire Tests (8 Max); Number of Color;Trash Tests (2,4,6,8)

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 4
Version 4.0 (1.99) Status - Page 4-6
4.10 Number of Micronaire Tests (8
max)
This item is used to indicate the number of micronaire tests that are to be
performed on each sample. Enter the amount using the number keypad,
then press ENTER. It is recommended that only one (1) micronaire test
be performed. If no tests should be performed, set the number of
micronaire tests to zero (0).
Note: If you enter a number greater than the maximum (8), an error
message will be displayed. Press
ANY KEY to clear the error message
and then enter a valid number.
4.11 Number of Color/Trash Tests
(2,4,6,8)
This item is used to indicate the number of color and trash tests that are
to be performed on each sample.
• Enter the amount using the number keypad, then press ENTER.
It is recommended that four (4) Color/Trash Tests be performed. If no
tests should be performed set the number of Color/Trash Tests to zero
(0).
Note: If you enter a number other than 2, 4, or 8, an error message will be
displayed. Press ANY KEY to clear the error message and then enter a valid
number.