USTER HVI 900 - Page 197

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 8
Version 4.0 (1.99) 940 DataManager - Page 8-31
7.4.1 Add an ID to a Currently Existing
Identifier
To add a test (ID) to a currently existing identifier, follow these steps.
• Enter the identifier name exactly as it is in the database. Enter a
new ID and all the test information. Press ESCAPE.
The new test is written to the database. To check that the new test is
where you want it, follow these steps.
• Select Change . Select the identifier name you just entered.
All the IDs associated with the selected identifier are listed, including the
one you just entered.
• Press ESCAPE to exit to the EDIT DATABASE MENU.
7.4.2 Add a New Identifier
To add a new identifier, follow these steps.
• Enter a new identifier name. Then, enter a new ID and all the test
information. Press ESCAPE.
The new identifier and new test are written to the database. To check
that the new identifier has been included in the database, follow these
steps.
• Select Change and then select the identifier name you just entered.
The test you just entered is listed for the new identifier.
•
Press ENTER to review the data for the ID. Press ESCAPE to exit to
the EDIT DATABASE MENU.