USTER®
HVI 900
Instruction Manual
Uster Technologies, Inc.
Chapter 8
Version 4.0 (1.99) 940 DataManager - Page 8-34
A confirmation window is displayed for each identifier that was
selected.
• Press "Y" to delete an identifier and all its associated tests, or press
"N" to abort the deletion process without deleting the identifier.
• Check that the identifier has been deleted by selecting Remove.
The identifier is no longer in the identifier list.
• Press ESCAPE to exit to the EDIT DATABASE MENU.
7.6.2 Remove One Test from an Identifier
To remove one test from an identifier, follow these steps.
• Highlight the identifier name from the window listing all the
identifiers, and press ENTER.
• Highlight the test to be deleted from the window listing the IDs for the
identifier, and press ENTER.
A window is displayed with the identifier name, and the ID.
•
Press "Y" to delete the test, or press "N" to abort the deletion
process without deleting the test.
• Check that the test has been deleted by selecting
Remove
, then
identifier
.
The ID list is displayed. The deleted test is not included.
•
Press ESCAPE to exit to the EDIT DATABASE MENU.
To Next Page
Loading...
