USTER HVI 900 - Page 327

USTER® HVI 900 SA Instruction Manual
Uster Technologies, Inc. Chapter 16
Version 4.0 (1.99) Index - Page 16-5
Disk Information, 14-2
Disk Operating System, 14-2
Diskettes, 14-2
Disk Operating System, 14-2
Diskettes, 14-2
E
Edit Color Chart, 4-9
Create a New Chart, 4-10
Create Slant Lines Color Chart, 4-13
Mesh Lines chart, 4-12
Modify an Existing Chart, 4-15, 4-23
Remove an Existing Chart, 4-16, 4-24
Edit Database
Add Information to the Database, 9-25
Change Information in the Database, 9-27
Remove Information from the Database, 9-28
Edit Lot Limits, 4-18
Determining the Action When Cotton Fails to Meet Lot Limits, 4-20
Retest, 4-20
Verify, 4-20
Electrical Power Requirements, 2-2
Elongation (Elong), 7-9
Elongation Transducer, 4-7
Epson Printer, 14-4
Error Messages, 1-8, 14-31
Exit From Operation, 1-9
Exit from Testing, 6-18, 7-19
Export Data, 9-24
F
Fiber Dependent Instrument Constants, 10-4
910 Max Amount, 10-5
910 Min Amount, 10-5
Break Amount, 10-5
Break Points, 10-5
Front Position, 10-6
SL1%, 10-5
SL2%, 10-5
Strength @ %Elongation, 10-6
Work @ %Elongation, 10-6
Fiber Name, 10-4
Fiber Selection Menu, 10-2, 10-3
Fiber Dependent Instrument Constants, 10-4
Man-Made Fiber Calibration Constants, 10-7
Man-Made Fiber Calibration Tolerances, 10-8
Man-Made Fiber Standard Values, 10-6
Fibrosampler 192, 13-1, 13-7
General Information, 13-1
Installation / Maintenance, 13-7
Purpose of the Instrument, 13-1
Sample Preparation, 13-4