USTER HVI 900 - Page 332

USTER® HVI 900 SA Instruction Manual
Uster Technologies, Inc. Chapter 16
Version 4.0 (1.99) Index - Page 16-10
Maturity, 1-7, 6-9, 7-10
Measurement Procedures for Color/Trash/NIR, 6-15, 7-15
Measurement Procedures for Micronaire, 6-11, 7-12
Mechanical Elongation Calibration, 5-23
Mechanical Elongation Calibration Instruction Screen, 5-24
Mechanical Elongation Test Screen, 5-25
Mechanical Elongation Calibration Instruction Screen, 5-24
Mechanical Elongation Test Screen, 5-25
Mesh, 4-10
Mesh Lines chart, 4-12
Message Box, 6-10, 7-11
Micronaire (MIC), 6-8, 7-9
Micronaire Calibration Menu, 5-27
Micronaire Calibration Status Menu, 5-30
Low Cotton Value and High Cotton Value, 5-30
Micronaire Cotton Calibration, 5-28
Micronaire Cotton Calibration Menu, 5-28
Micronaire Calibration Status Menu, 5-28
Micronaire Cotton Calibration, 5-28
Micronaire Module, 1-6
Micronaire Module Testing, 8-13
Continue with Testing, 8-13
DataManager, 8-16
Exit from Micronaire Module Testing, 8-20
Explanation of the Micronaire Module Testing Screen, 8-18
External Computer, 8-14
Identifier, 8-13
Number of Tests, 8-14
Printer, 8-14
Reject Sample to Computer/DataManager, 8-17
Sign Off External Computer, 8-17
Testing Procedures, 8-19
Micronaire Module Testing Procedures, 8-19
Micronaire Module Testing Screen, 8-18
Modify an Existing Chart, 4-15, 4-23
Continue Editing, 4-15, 4-23, 4-24
Do Not Save Chart, 4-15, 4-23, 4-24
Save Chart, 4-15, 4-23, 4-24
Modify an Existing Color Chart Screen, 4-15
Module Testing, 3-5, 8-1
Color/Trash Module Testing, 8-21
Length/Strength Module Testing, 8-2
Micronaire Module Testing, 8-13
NIR Module Testing, 8-29
Module Testing Menu, 3-5
Monitor Information, 14-3
Motor Constants Menu, 10-2, 10-9
Breaker Read Rate, 10-10
Brusher Forward, 10-10
Comb Read Rate, 10-10
N