USTER HVI 900 - Page 334

USTER® HVI 900 SA Instruction Manual
Uster Technologies, Inc. Chapter 16
Version 4.0 (1.99) Index - Page 16-12
Power Distribution Box Label, 1-15
Print Histogram, 9-17
Print Status Listing, 10-2, 10-10
Printer Information, 14-4
Epson Printer, 14-4
Printer Switch Settings, 14-4
Wenger Printer, 14-4
Okidata 520 Printer, 14-5
Printer Switch Settings, 14-4, 14-4
Epson Printer, 14-4
Wenger Printer, 14-4
Printing the Test Results, 6-19, 7-20
Property, 9-16
Protocol, 9-23
R
Rd, 6-8, 7-9
Recommended Lot Limits, 14-15
Reflectance (%Rd), 1-7
Remove an Existing Chart, 4-16, 4-24
Remove Information from the Database
Remove All Tests for an Identifier, 9-29
Remove One Test from an Identifier, 9-29
Remove Test Data from the Database, 9-28
Remove All Tests for an Identifier, 9-29
Remove One Test from an Identifier, 9-29
Report Generated to Printer, 9-14
Report Generated to Screen, 9-12
Report Header Abbreviations, 9-7
Reports
Destination, 9-6
Limits to Selecting Properties, 9-10
Make Report, 9-12
Overview, 9-6
Report Header Abbreviations, 9-7
Report Type, 9-6
Selecting Fiber Properties to Appear on the Report, 9-9
Selecting the Destination for the Report, 9-12
Selecting the Identifier(s), 9-7
Selecting the Type of Report, 9-11
Tests Included on the Report, 9-11
Reset Sample Counter, 7-5
Resetting the 900 System, 3-8
Retest Tolerances, 4-25
Retest Tolerances Menu, 4-25
S
Safety Warning Labels, 1-12
Breaker Arm Label, 1-16
Brusher Crush Label, 1-14
Brusher Pinch Label, 1-14