USTER HVI 900 - Page 67

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 4
Version 4.0 (1.99) Status - Page 4-27
Inter-relationships exist among all cotton fiber properties. The SCI
equation uses these similarities to analyze the effects groups of bale
samples may have on yarn spinning consistency.
A screen is displayed that lists the standard values recommended by
Uster Technologies, Inc. and the current values used for calculating SCI.
The standard values listed in the first (left) column are the values
recommended by Uster Technologies. These standard values cannot be
changed and are listed so that you can compare the current values with
the standard values. The second column shows the coefficients that are
active in calculating the SCI. When the software is shipped, the second
column is set equal to the standard values. The regression formula
will use those values listed in the second column for the
calculation.
•
The current values can be changed individually. Using the arrow
keys, move the cursor to the value to be changed. Press ENTER for
an entry box to be displayed.
• Type the new value, then press ENTER. The value will be displayed
in the current value column.
• When you have finished entering values, press ESCAPE to save the
information and return to the S
TATUS MENU.