USTER HVI 900 - Page 73

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 4
Version 4.0 (1.99) Status - Page 4-33
ENTER. The data is automatically written to the hard disk and
stored by the name assigned.
• Before you select
Print , make sure a printer is connected to the
system, that it is turned "ON," and that it is on-line. The printout
automatically begins when
Printer is selected.
Note: We recommend that both reports be printed after the initial
installation and calibration are completed. One copy of these reports
should be returned to Uster Technologies, Knoxville, with the HVI 900
System Installation Guide/Report. Another copy of the reports should
be stored with the original system diskettes in a safe place. These
reports will serve as a reference if a new version of the software is
received and values need to be re-entered.