22 Apply a non-hardening sealing compound to the cylinder block.
23 Operate the engine room crane to lift and move the cylinder liner into position above the
cylinder block.
24 Operate the engine room crane to lower the cylinder liner into the cylinder block. Make
sure that the pin (003) engages with the hole in the holder.
25 Remove the lifting tool (006).
26 Install the pipes to the lubricating quills as follows:
26.1 Remove the protection from the pipes.
26.2 Connect the pipes.
26.3 Attach the holders to the pipes.
CLOSE UP
• None
X62DF
AA00-2124-00AAA-720A-A
Maintenance Manual Cylinder liner - install
Winterthur Gas & Diesel Ltd.
- 192 - Issue 002 2020-10
To Next Page
Loading...
