2 Prepare the expansion (front) side of the SAC for removal.
2.1 If applicable, remove the two rollers (002, Figure 11-15).
2.2 Remove the flange (003).
2.3 Remove and discard the O-ring (005).
2.4 Attach three swivel lugs (008).
2.5 Attach the left and the right support (011, 009) with the screws (012).
Fig 11-15 Scavenge air cooler (example) - prepare front side
001
002
003
I
III
004
I
005
006
003 007
III
004
002 002
004
008
009
010
011
012
X62DF
AA00-6606-00AAA-520A-A
Maintenance Manual Scavenge air cooler - remove
Winterthur Gas & Diesel Ltd.
- 649 - Issue 002 2020-10
To Next Page
Loading...
