SmartPAC 2 with WPC 2000 Integration User Manual 1128600
Initialization Mode 4-51
To change passwords, perform the following steps:
1. On the Security Access Menu (see Figure 4-30, page 4-47), press F1 (Change Passwords)
to display the Set Passwords Menu (see Figure 4-32).
2. Select the password you want to change. The screen shown in Figure 4-33 displays.
3. Key in the new password, following the instructions in the window, and press ENTER.
You are returned to the Set Passwords Menu.
DEFAULT PASSWORDS
Your SmartPAC 2 comes from the factory with all passwords set to the default password “1234.” If
you have upgraded your SmartPAC 2 in the field, your passwords may be different.
Figure 4-32. Set Passwords Menu
Figure 4-33. “Enter a New Password” Screen
To Next Page
