YASKAWA E-7S SERVOPACK SGD7S - Parameter Setting Methods

5.1 Manipulating Parameters (Pn)
5.1.3 Parameter Setting Methods
5-5
5
Basic Functions That Require Setting before Operation
5.1.3 Parameter Setting Methods
You can use the SigmaWin+ or a Digital Operator to set parameters.
Use the following procedure to set the parameters.
Setting Parameters with the SigmaWin+
1.
Click the Servo Drive Button in the workspace of the Main Window of the SigmaWin+.
2. Select Edit Parameters in the Menu Dialog Box.
The Parameter Editing Dialog Box will be displayed.
3. Click the cell of the parameter to edit.
If the parameter to edit is not displayed in the Parameter Editing Dialog Box, click the or Button
to display the parameter to edit.
4. Change the setting of the parameter.
5. Press the Enter Key.
The background of the edited parameter cell will change to green.
1. For a parameter for a numeric setting, input the numeric setting.
2. If the parameter requires selection of a function, select the function from the list of
selections.
Information