YASKAWA E-7S SERVOPACK SGD7S User Manual

3.2 Attaching the INDEXER Module to the SERVOPACK
3-3
3
Installation
3.2 Attaching the INDEXER Module to the SERVOPACK
Install the INDEXER Module correctly according to the installation procedures that are included
with it.
Σ-V-Series/Σ-V-Series for Large-Capacity Models/Σ-7-Series Installation Guide Command Option Module
(TOBP C720829 01).

YASKAWA E-7S SERVOPACK SGD7S Specifications

General

Model	SGD7S
Type	Servo Drive
Category	Servo Drives
Manufacturer	YASKAWA
Humidity	90% RH or less (non-condensing)
Vibration Resistance	5.9 m/s² (0.6 G) at 10 to 60 Hz
Pollution Degree	2
Output Power	Varies by model
Control Method	Speed, Torque, Position Control
Communication Interface	MECHATROLINK-III, EtherCAT
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Encoder Error
Ambient Temperature	0 to +55°C (32 to 131°F)
Storage Temperature	-20 to 85°C
Shock Resistance	49 m/s² (5 G)
Altitude	1000m or less above sea level
Installation	Panel-mounted
Cooling Method	Natural Convection or Forced Air Cooling
Weight	Varies by model