YASKAWA E-7S SERVOPACK SGD7S - Monitoring Product Information; Items that You Can Monitor; Operating Procedures

9.1 Monitoring Product Information
9.1.1 Items That You Can Monitor
9-2
9.1 Monitoring Product Information
9.1.1 Items That You Can Monitor
9.1.2 Operating Procedures
Use the following procedure to display the Servo Drive product information.
• Select Read Product Information in the Menu Dialog Box of the SigmaWin+. The Read
Product Information Window will be displayed.
Monitor Items
Information on SERVOPACKs
• Model/Type
• Serial Number
• Manufacturing Date
• Software version (SW Ver.)
• Remarks
Information on Servomotors
• Model/Type
• Serial Number
• Manufacturing Date
• Remarks
Information on Encoders
• Model/Type
• Serial Number
• Manufacturing Date
• Software version (SW Ver.)
• Remarks
Information on Option Modules
• Model/Type
• Serial Number
• Manufacturing Date
• Software version (SW Ver.)
• Remarks
With the Digital Operator, you can use Fn011, Fn012, and Fn01E to monitor this information.
Refer to the following manual for the differences in the monitor items compared with the Sig-
maWin+.
Σ-7-Series Digital Operator Operating Manual (Manual No.: SIEP S800001 33)
Information