14.5 Global Commands
14-8
14.5
Global Commands
Global commands are commands that are sent to all axes at the same time.
Command (Host controller → INDEXER Module) Response (Host controller ← INDEXER Module)
The axis number setting “*” is the global address and
addresses all axes.
No echoback or response is returned when the global
address is used.
No response returned.
When global commands are used, improve the communications reliability by reading the status
when appropriate.
“*”
Command character string Delimiter
Example:*SVON [CR]
*ST [CR]
*PUN [CR]
Important
To Next Page
Loading...
