YASKAWA E-7S SERVOPACK SGD7S - Page 27

xxvii
*1. Certification is pending.
*2. SGM7E: Certification is pending, SGMCS: No application has been made for certification.
Note: 1. We declared the CE Marking based on the harmonized standards in the above table.
2. These products are for industrial use. In home environments, these products may cause electromagnetic interfer-
ence and additional noise reduction measures may be necessary.
 Safety Standards
 Safety Parameters
Product Model EU Directive Harmonized Standards
Direct Drive
Servomotors
• SGM7E
*1
• SGM7F
• SGMCV
• SGMCS-
B, C,
D, E
(Small-Capacity, Coreless
Servomotors)
EMC Directive
2004/108/EC
EN 55011 group 1, class A
EN 61000-6-2
EN 61000-6-4
*2
EN 61800-3
*2
Low Voltage Directive
2006/95/EC
EN 60034-1
EN 60034-5
Linear
Servomotors
• SGLG
• SGLF
• SGLFW2
• SGLT
EMC Directive
2004/108/EC
EN 55011 group 1, class A
EN 61000-6-2
EN 61000-6-4
Low Voltage Directive
2006/95/EC
EN 60034-1
Product Model Safety Standards Standards
SERVOPACKs SGD7S
Safety of Machinery
EN ISO13849-1: 2015
IEC 60204-1
Functional Safety
IEC 61508 series
IEC 62061
IEC 61800-5-2
EMC IEC 61326-3-1
Item Standards Performance Level
Safety Integrity Level
IEC 61508 SIL3
IEC 62061 SILCL3
Probability of Dangerous Failure per Hour
IEC 61508
IEC 62061
PFH = 4.04 × 10
-9
[1/h]
(4.04% of SIL3)
Performance Level EN ISO 13849-1 PLe (Category 3)
Mean Time to Dangerous Failure of Each Channel EN ISO 13849-1 MTTFd: High
Average Diagnostic Coverage EN ISO 13849-1 DCavg: Medium
Stop Category IEC 60204-1 Stop category 0
Safety Function IEC 61800-5-2 STO
Mission Time IEC 61508 10 years
Hardware Fault Tolerance IEC 61508 HFT = 1
Subsystem IEC 61508 B
Continued from previous page.