Revision History-1
Revision History
The revision dates and numbers of the revised manuals are given on the bottom of the back cover.
Date of Publication
Rev.
No.
Section Revised Contents
March 2017 <5> Preface, 12.5 Partly revised.
4.4.3, 5.14.1 Addition: Information on SQ47 and SQ57 Linear Encoders from Magnes-
cale Co., Ltd.
5.14.1 Addition: Information on LIC2100-Series and LC415 Linear Encoders
from Heidenhain Corporation.
5.14.1, 5.16 Addition: Information on RESOLUTE Linear Encoders from Renishaw
PLC.
15.2.2, 16.2.2 Revision: Reference information
Back cover Revision: Address
December 2016 <4> Preface Partly revised.
1.6.3, 4.4.2,
4.4.3, 5.14.1,
5.15, 6.7
Addition: Information on Rotary Servomotors with 24-bit batteryless
absolute encoders.
November 2016 <3> Preface Partly revised.
1.7.2 Addition: Information on Direct Drive Servomotors (SGM7F-
A,
-
M, -N)
4.4.3, 5.14.1,
5.16
Addition: Information on Renishaw PLC EVOLUTE linear scales
September 2016 <2> All chapters Addition: Information on Direct Drive Servomotors (SGM7E and SGM7F
models)
Deletion: Information on Linear Servomotors (SGLC models)
Preface, 9.1, 9.2 Partly revised.
2.1.1 Addition: Information on input current from control power supply
2.1.3, 4.2, 4.5 Revision: “Linear Servomotor overheat protection signal input” changed
to “overheat protection input.”
3.7 Addition: EMC installations for single-phase 200-VAC and single-phase
100-VAC models.
6.14, 8.12.3 Newly added.
Chapter 15 Addition: A.862 and A.93B
Chapter 16 Addition: Pn022, Pn475, Pn476, Pn61A, Pn61B, Pn61C, and Pn61D
Deletion: Pn52D
17.1.2 Addition: Un02F
Back cover Revision: Address
November 2015 <1> Front cover Revision: Format
All chapters Completely revised
Back cover Revision: Format and address
March 2015 −− First edition
MANUAL NO. SIEP S800001 64B <1>
Published in Japan November 2015
Date of publication
Revision number