YASKAWA MP2300S - Ethernet Connector Details

3.2 Basic Module Connections
3.2.4 Ethernet Connector Details
3-19
Mounting and Wiring
3.2.4 Ethernet Connector Details
Connects to a personal computer or HMI device by Ethernet (100Base-TX /10Base-T).
( 1 ) Ethernet Connector Specification and Pin Arrangement/ Indicator Light
The following table provides the Ethernet connector specifications.
The following table provides Ethernet connector pin arrangement/ indicator light details.
( 2 ) Ethernet Cable
For the Ethernet cable, use a twisted pair cable with RJ-45 connector.
Name
Connector
Name
Number
of Pins
Connector Model
Module Side Cable Side Manufacturer
Ethernet Ethernet
8 RJ-45 CAT5 Socket RJ-45 CAT5 Plug Pulse Engineering, Inc.
Pin Number Signal Name Description
1TXD+Transmitted data + side
2TXD-Transmitted data – side
3RXD+Received data + side
4
– –
5
– –
6RXD-Received data – side
7
– –
8
– –
Display Name Display Color Description
LINK
Yellow
Lit: Connect
Unlit: Unconnected
100M
Green
Lit: Connected at 100Mbps, or automatically
negotiating
Unlit: Connected at 10Mbps
'VJGTPGV
.+0-
/
Ethernet Type Category Remarks
10Base-T Category 3 or more
• When connecting to remote equipment through a hub: Straight cable
• When connecting to remote equipment without using a hub: Cross cable
100Base-TX Category 5 or more