YASKAWA MP2300S - Screwed Method of Mounting

3.1 Mounting MP2300S
3.1.1 Method
3-5
Mounting and Wiring
( 2 ) Screwed Method
Use a panel mounting clamp (optional) by the following procedure to mount MP2300S on the panel.
1. Release DIN fixing locks (two) at the center of the panel mounting clamp.
2. Insert two convex portions at the top of the panel mounting clamp into holes of the MP2300S case.
3. Push the clamp as indicated by an arrow above onto the MP2300S case and use DIN fixing locks to fix
MP2300S.
Two convex clamps
Two DIN fixing
lock positions
When locked
When released
A
ttachment for mounting panel