YASKAWA MP2300S - Revision History

Revision History
The revision dates and numbers of the revised manuals are given on the bottom of the back cover.
MANUAL NO.ޓSIEP C880732 00A
Published in Japan September 2009 07-11
Date of
publication
Date of original
publication
Revision number
WEB revision number
0 -1
Date of Publication
Rev.
No.
WEB
Rev.
No.
Section Revised Contents
March 2015 0
1.5.1 Revision: Sumitomo 3M → 3M Japan Limited
1.5.2 Revision: Description of RLY OUT connector and DIN rail mounting parts
Back cover Revision: Address
August 2013 2
1.5.2 Addition: Description of optional cover
Back cover Revision: Address
May 2012 1
3.2.3
Revision: MECHATROLINK connector model
December 2011 0
– Based on the Japanese user's manual,
SIJP C880732 00D<6>-0, published in October 2011
Front cover Revision: Format
All chapter Completely revised
Back cover Revision: Address, format
June 2010 3
2.2.2 (2)
Revision: Description of status of IP
April 2010 2
1.5.1 Revision: Application of MP2300S Basic Module and SVB-01
Revision: Model of MP2300S Basic Module and SVB-01
JEPMC-W6011- → JEPMC-W6010-
2.2.3 Addition: Allowable Power Loss Time
4.2.2 Addition: Step 6
4.4.1 Addition: Description of Note
5.2.2 (5) [b] Revision: Description in parentheses of MSEE work resisters address
hexadecimal number → decimal number
5.2.4 (1), (3) Revision: Types of Drawings
FSTART command → FUNC command
6.2.4 (1) Revision: Parameter list setting example for the message transmit function
MW00000 → MW00400
connection number = 1 → connection number = 3
6.3.1 (1) Revision: The other device to be connected in step 4  and 
MP2300 → touch panel
8.2.4 (5) [c] Revision: Table 8.4 Ladder Program User Operation Error Codes 2
06DH: PD → 06EH: PD
September 2009 1
Preface Addition: Warranty
Back cover Revision: Address
November 2007 0
–
First edition
2
1
0