YASKAWA MP2300S - 218 IFA Module (Ethernet)

2.2 Basic Module
2.2.4 218IFA Module (Ethernet)
2-12
2.2.4 218IFA Module (Ethernet)
( 1 ) Overview of 218IFA Module Functions
MP2300S built-in 218IFA module is a 10Base-T/100Base-TX Ethernet interface and a communication interface
equipped as standard in MP2300S.
• 100 Mbps transmission speed is supported (100Base-TX).
• Supports the following various communication protocols:
• Support for MEMOBUS protocol, Extended MEMOBUS protocol
• Support for MELSEC protocol (A-compatible 1E frame)
• Support for MODBUS/TCP protocol
• Support for non-procedure communication
• An I/O message communication function enables you the data exchange in the form of I/O image when commu-
nicating with upper PLC, eliminating you from creating a ladder program.
• An automatic receive function eliminates you from creating a ladder program when connected to the indicator
and the like.
• Enables you to use as a standard interface with the engineering tool MPE720. In addition, provides a simple
function for connecting with the engineering tool, allowing you to connect to MPE720 without the MP2300S IP
address.