viii
Storage and Transportation
Installation
Do not store or install the MP2300S in the following locations.
There is a risk of fire, electrical shock, or device damage.
Direct sunlight
Ambient temperature exceeds the storage or operating conditions
Ambient humidity exceeds the storage or operating conditions
Rapid changes in temperature or locations subject to condensation
Corrosive or flammable gas
Excessive dust, dirt, salt, or metallic powder
Water, oil, or chemicals
Vibration or shock
Do not overload the MP2300S during transportation.
There is a risk of injury or an accident.
Do not under any means subject the MP2300S to an atmosphere that contains halogen gas (fluorine, chlo-
ride, bromine, iodine, etc.) during storage, transportation, or installation.
There is a risk of damage or malfunction.
If disinfectants or insecticides must be used to treat packing materials such as wooden frames, pallets, or
plywood, the packing materials must be treated before the product is packaged, and methods other than
fumigation must be used.
Example: Heat treatment, where materials are kiln-dried to a core temperature of 56°C for 30
minutes or more.
If the electronic products, which include stand-alone products and products installed in machines, are packed with
fumigated wooden materials, the electrical components may be greatly damaged by the gases or fumes resulting from
the fumigation process. In particular, disinfectants containing halogen, which includes chlorine, fluorine, bromine, or
iodine can contribute to the erosion of the capacitors.
Never use the MP2300S in locations subject to water, corrosive atmospheres, or flammable gas, or near
burnable objects.
There is a risk of electrical shock or fire.
Do not step on the MP2300S or place heavy objects on the MP2300S.
There is a risk of injury.
Do not block the air exhaust port or allow foreign objects to enter the MP2300S.
There is a risk of element deterioration inside, an accident, or fire.
Always mount the MP2300S in the specified orientation.
There is a risk of an accident.
Do not subject the MP2300S to strong shock.
There is a risk of an accident.
To Next Page
Loading...
Need help?
General
