Appendix I Installing MPE720 Version 6
A-133
Appendix I Installing MPE720 Version 6
MPE720
MPE720 Version 6 (CPMC-MPE770) is the Engineering Tool for the MP2000-series Machine Controllers.
With this tool installed on a computer and with a connection to a controller through a Communication Module, you can
program, control, and monitor the controller from computer windows.
How to Install
When you purchase MPE720 version 6, you will receive an installation CD-ROM.
Use this installation CD-ROM to install MPE720 version 6.
For the installation procedure, refer to the Engineering Tool for MP2000 Series Machine Controller MPE720 Version 6
User's Manual (manual number: SIEP C880700 30).
Version Upgrade
Version upgrade service is provided free of charge for two years after purchase. To receive a free version upgrade,
membership registration on the Yaskawa e-Mechatronics website and online user registration for MPE720 version 6 are
required. After you are registered, information on version upgrades will be sent to members by e-mail. Members can
download an upgraded version of the software from the Yaskawa e-Mechatronics website (http://www.e-mechatron-
ics.com) or send us the application form that is included with the installation CD-ROM of MPE720 version 6.
To Next Page
Loading...
