YASKAWA MP2300S - 4.4 Executing Motion (step 3)

4.4 Executing Motion (step 3)
4.4.1 Registering Program Execution
4-11
System Start Up and Easy Programming
4.4 Executing Motion (step 3)
4.4.1 Registering Program Execution
1. Click the Execution Registration Icon.
Note: This motion program was made with the assumption that Enable (Servo ON) was selected in step
2 of 4.2.3 ( 2 ) Operating Manually in the Test Operation Screen.
The Program Execution Registry Screen Dialog Box will appear.
2. Check the program number and click Set to save the registered contents.