YASKAWA MP2300S - Specification Overview of the Message Receive Function; Message Receive Function (MSG-RCV

Appendix G MSG-SND/MSG-RCV Functions (Ethernet)
G.2 Message Receive Function (MSG-RCV)
A-86
G.2 Message Receive Function (MSG-RCV)
This section explains how the message receive function (MSG-RCV) is used in a ladder program when receiving mes-
sages.
G.2.1 Specification Overview of the Message Receive Function
* 1. The meanings of I/O options are as follows:
 B-VAL: Specify I/O by bit type data.
 I-REG: Specify I/O by integer type data. When specifying, set an integer type register number.
As for the input only, it can be a constant (literal).
 Address input: The address of the specified register (any integer register) is passed to the function.
* 2. When transmitting in MEMOBUS, Extended MEMOBUS, MELSEC, OMRON, or MODBUS/TCP protocol, set the
communication protocol (Pro-Typ) to MEMOBUS(=1). The communication device automatically converts the proto-
col.
* 3. Non-procedure 1: In non-procedural communication, data is received on a per-word basis.
Non-procedure 2: In non-procedural communication, data is received on a per-byte basis.
Function Name MSG-RCV
Function
Receives messages from the remote station on the circuit specified by the communication device type. Supports
multiple protocol types.
Keep the execution command (Execute) until Complete or Error turns ON.
Function Defi-
nition
I/O Definition
No. Name
I/O Option
*1
Contents
Input Item
1 Execute B-VAL Executes a reception
2 Abort B-VAL Forcibly ends a reception
3 Dev-Typ I-REG
Communication device type
Ethernet (218IF) = 6, Ethernet (218IFA, 218IFB, 218IFC) = 16
4 Pro-Typ I-REG
Communication protocol
MEMOBUS
*2
= 1, non-procedure 1
*3
= 2,
non-procedure 2
*3
= 3
5 Cir-No I-REG
Line number
Ethernet (218IF) = 1-8, Ethernet (218IFA) = 1 to 8
6 Ch-No I-REG
Communication buffer channel number
Ethernet (218IF) = 1-10, Ethernet (218IFA) = 1 to 4
7 Param Address input
Parameter list start address
(MA, DA)
Output Item
1 Busy B-VAL In process
2 Complete B-VAL Process completed
3 Error B-VAL Error occurred
MSGRCV
Execute
Abort
Dev-Typ
Pro-Typ
Cir-No
Ch-No
Param
Busy
Complete
Error